Mingjiada offers high prices for the purchase of Vishay drive components: capacitors/resistors/inductors

 Under the wave of power upgrades for new energy vehicle electric drive systems, industrial automation and AI servers, Vishay's capacitors, resistors and inductors, as the "golden triangle" of electrical energy conversion and signal processing, directly determine the reliability of the system based on their performance. However, production line switches, design changes or order fluctuations often result in a large number of brand-new original Vishay passive components being stranded in the warehouse, becoming "frozen capital" on the company's balance sheet. Shenzhen Mingjiada Electronics Co., LTD., relying on 16 years of automotive electronics recycling technology accumulation and a global terminal channel network, has launched a special high-price recycling program for Vishay drive components - through scientific assessment, rapid payment recovery and compliant regeneration, helping customers transform idle assets into core competitiveness.

I. Core Advantages of Mingjiada's Recycling of Vishay Drive Components

1. Precise pricing based on technology, with significant premiums for rare models

Premium for automotive-grade components: Vishay inductors supporting 800V high-voltage platforms (such as the IHLE-4040 series) and automotive-grade MLCCS (such as VJ HIFREQ) can be recycled at 70% to 85% of their market circulation prices due to the surging demand for new energy.

High-frequency/high-power model surcharges: For instance, the WSHP series of metal strip resistors (with a power density of 15W/cm²) and iron-silicon-aluminum power inductors are dynamically increased by 15% to 30% based on the terminal gap.

2. Four-dimensional quantum-level detection eliminates value loss

Mingjiada has established a dedicated testing system for automotive electronics to ensure that components are "not installed on machines and have zero aging"

Extreme environment simulation: 100 cycles of impact in a temperature circulation chamber at -40 ° C to 150 ° C to screen components that meet the AEC-Q200 Grade 0 standard;

High-frequency characteristic verification: The inductance Q value (> 100@1MHz) and capacitance ESR (< 5mΩ) were measured by the vector network analyzer.

Non-destructive structural appraisal: X-ray scanning of internal structure + original factory code verification, 100% exclusion of refurbished parts;

Mechanical stress test: Apply a 50G vibration acceleration to the power inductor to verify the core's resistance to displacement.

3. Global ultra-fast response, with capital recovery as fast as 48 hours

24-hour domestic door-to-door pick-up (priority given to the Yangtze River Delta/Pearl River Delta regions);

Cross-border orders are settled within 72 hours through the Hong Kong DDP customs clearance hub.

Upon successful inspection, the full payment will be remitted by telegraphic transfer. Multi-currency settlement is supported, and the capital efficiency is 200% higher than traditional recovery.

Second, focus on the scope of Vishay drive components for recycling

Mingjiada covers all categories of capacitors, resistors and inductors. Requirements: Unsoldered, original factory packaging, batch traceable

• Capacitor - The "Stabilizer" for buffering Electrical Energy

Automotive-grade wet tantalum capacitors: T59 series (resistant to extreme temperatures ranging from -55 ° C to 125 ° C), used in airbag ECUs;

High-voltage MLCC stacked array: VJ HIFREQ series (ESR < 0.5mΩ), suitable for transient absorption in 48V mild mixing systems.

Resistors - The "safety valve" for circuit protection

Precision metal strip resistors: WSHP series (response < 1μs), used for IGBT drive protection;

Current detection resistor: WSLP2726 (temperature drift ±75ppm/℃), providing sub-milliohm sampling reference for BMS;

Thin film/thick film resistors: VHP, CRCW and other series, covering medical devices to consumer electronics scenarios.

• Inductor - The "Metronome" for Electrical Energy conversion

Iron-silicon-aluminum power inductors: IHLE-4040 series (saturation current 48A), resistant to di/dt impulse > 100A/μs;

Metal composite inductors: IWHP series (self-resonance > 10MHz), suppressing hundred-megahertz-level ringing noise of SiC MOSFET.

Note: Priority will be given to the recovery of unopened slow-move materials and leftover materials from EOL projects from the original equipment manufacturers (Oems) and Tier1 suppliers. The matching purchase vouchers can increase the valuation by 5% to 10%.

Three - and four-step minimalist recycling process

List submission: Send model, quantity, package (e.g. SOP-8, 0805) and batch to sales@hkmjd.com, along with package photos;

Technical pricing: Feedback on the testing plan and quotation within 24 hours, and support for third-party re-inspection by SGS.

Safe delivery: Shenzhen/Hong Kong warehouse MSL3 moisture-proof packaging;

Inspection and payment upon delivery: Quality inspection will be completed within 48 hours of arrival and full payment will be made. At the same time, a traceability certificate for precious metal recycling will be provided.

Act now and unlock the value of your Vishay components!

Recycling hotline: Mr. Chen +86 13410018555

Technical evaluation: sales@hkmjd.com (with model/quantity/batch, 24-hour accurate quotation)

Official website price: www.mjdic.com