TLK2501IRCP

 TLK2501IRCP  -1.5 TO 2.5 GBPS TRANSCEIVER

description

The TLK2501 is a member of the transceiver family of multigigabit transceivers used in ultrahigh-speed

bidirectional point-to-point data transmission systems. The TLK2501 supports an effective serial interface

speed of 1.5 Gbps to 2.5 Gbps, providing up to 2 Gbps of data bandwidth. The TLK2501 is pin-for-pin compatible

with the TLK2500. The TLK2501 is both pin-for-pin compatible with and functionally identical to the TLK1501,

a 0.6 to 1.5 Gbps transceiver, and the TLK3101, a 2.5 to 3.125 Gbps transceiver, providing a wide range of

performance solutions with no required board layout changes.

The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband

data transmission over controlled impedance media of approximately 50 Ω. The transmission media can be

printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is

dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

This device can also be used to replace parallel data transmission architectures by providing a reduction in the

number of traces, connector terminals, and transmit/receive terminals. Parallel data loaded into the transmitter

is delivered to the receiver over a serial channel, which can be a coaxial copper cable, a controlled impedance

backplane, or an optical link. It is then reconstructed into its original parallel format. It offers significant power

and cost savings over current solutions, as well as scalability for higher data rate in the future.

The TLK2501 performs data conversion parallel-to-serial and serial-to-parallel. The clock extraction functions

as a physical layer interface device. The serial transceiver interface operates at a maximum speed of 2.5 Gbps.

The transmitter latches 16-bit parallel data at a rate based on the supplied reference clock (GTX_CLK). The

16-bit parallel data is internally encoded into 20 bits using an 8-bit/10-bit (8B/10B) encoding format. The

resulting 20-bit word is then transmitted differentially at 20 times the reference clock (GTX_CLK) rate. The

receiver section performs the serial-to-parallel conversion on the input data, synchronizing the resulting 20-bit

wide parallel data to the extracted reference clock (RX_CLK). It then decodes the 20 bit wide data using

8-bit/10-bit decoding format resulting in 16 bits of parallel data at the receive data terminals (RXD0-15). The

outcome is an effective data payload of 1.20 Gbps to 2.0 Gbps (16 bits data x the GTX_CLK frequency).

The TLK2501 is housed in a high performance, thermally enhanced, 64-pin VQFP PowerPAD package. Use

of the PowerPAD package does not require any special considerations except to note that the PowerPAD, which

has an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. It is

recommended that the TLK2501 PowerPAD is soldered to the thermal land on the board. All ac performance

specifications in this data sheet are measured with the PowerPAD soldered to the test board.

Hot-Plug Protection

1.5 to 2.5 Gigabits Per Second (Gbps)

Serializer/Deserializer

High-Performance 64-Pin VQFP Thermally

Enhanced Package (PowerPAD)

2.5-V Power Supply for Low Power

Operation

Programmable Voltage Output Swing on

Serial Output

Interfaces to Backplane, Copper Cables, or

Optical Converters

Rated for Industrial Temperature Range

On-Chip 8-Bit/10-Bit (8B/10B)

Encoding/Decoding, Comma Alignment,

and Link Synchronization

On-Chip PLL Provides Clock Synthesis

From Low-Speed Reference

Receiver Differential Input Thresholds

200 mV Minimum

Typical Power: 360 mW

Loss of Signal (LOS) Detection

Ideal for High-Speed Backplane

Interconnect and Point-to-Point Data Link

由于客户采购批量与样品的价格不同，网上无法统一注明，请您把采购型号通过邮件或客服QQ：2850151585 发给我们，也可以拨打明佳达国内销售部电话：0755-83957301，由客服人员为您报价；有时元件厂商价格稍许变动，本公司未能及时调整，如您觉得售价稍高，请与我们说明并适当议价，感谢支持!

MJD is a corporation which engaged in agency electronic components. MJD Through seventeen years unrimitting efforts,  aspire to provide our customers with world-leading products and service. Now already became a one of the most famous electronic components distributor in China.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 PAYMENTS:

We support the following payment methods:

 1. Paypal

 2. Western Union 

 3. Bank Wire (TT)

 4. MoneyGram

Shipping:

1. MJD needs about 3 BUSINESS DAY to handle the order after received payment. after receiving your payment. Otherwise, we will state it in the invoice in advance.

2. MJD can Ship via your shipping account (DHL / FEDEX / UPS / TNT or others) as your instruction. Or Ship via our shipping account (We have a very good relationship with DHL and FEDEX with very special freight).

3. Regarding the declared value on the package for customs clearance, we are pleased to follow

your wishes, just feel free to inform us when ordering.

4. Any import fees or charges are the buyer's responsibility.

REFUNDS & RETURN:

We offer a warranty on all items that we sold. Item will be tested before ship,it will be in good condition,if there are some problems with the item,feel free to contact us.Please Email us to notify a defective item. Unless otherwise specified, this item comes with 30 days warranty from the shipment date.

You must contact us before returning any product. All returns must be made within 30 days from this shipment date.Return must be in new condition(the SAME CONDITION as it was sent to you)

Because of wholesale price is different from sample price, our website can not state.Please send your required part number via email to Sales@hkmjd.com or add our skype id mjdccm898 for online talking.As well as welcome you call us : 0755-83957301  We will send offer for you;  Sometimes manufacturer's price is unstable, so we don't adjust price in time. if you feel price is a little high for you, just feel free to contact us for consultation. Thank you for your support ！